Beltronics 980 - Manual (Page 6)


Q-START
(Quick-Start Mode)
Unit will bypass any form of a power-up test sequence and
will display “
CITY
” or “
HIGHWAY
” depending upon the mode
previously selected. Unit is ready for operation.
TUTORIAL MODE
The Tutorial Mode allows you to become more familiar with
all audible and visual alerts. The message “
TUTORIAL ”
appears in the display followed by the audio and corresponding
Text Message for “
LASER ” , “
Ka AUDIO ” , “
K AUDIO ” , “
X
AUDIO ” , sample Radar alert (K band signal ramping from
weak to strong) and “
SAFETY WARNING SYSTEM SAMPLE
ALERTS ” . Three sample sws ™ messages are then presented in
the display along with the corresponding Digital Voice Message:
Sample 1 “
ACCIDENT AHEAD ”
Sample 2 “
HIGHWAY WORKCREW AHEAD ”
Sample 3 “
POLICE IN PURSUIT ”
While sample messages are playing you can access the
complete list of sws ™ messages by pressing the cty button to
move forward in the list.“
MSG 1 ” will appear in the display
confirming your selection (to move backward in the list, press
the drk button). Pressing the aud button allows you to listen
to the sws
™ message while viewing it in the display. Press the
cty
button again to step to the next message; press the aud
button to review, and so on. This allows you to review all
60
messages.
To exit Tutorial Mode, press the pwr button and your unit
will be on and ready to receive signals.
Set and Forget Memory
Any time bel 980 or bel 950 are turned off or unplugged from
the cigarette lighter socket, all feature settings you have selected
are retained in the unit’s memory. Set and Forget Memory
eliminates the need to reset your preferred feature settings
each time your unit is turned off and then back on.
