Beltronics 980 - Manual (Page 5)

7.
Laser Optical Sensors: collect Laser signals from in front and
behind.
8.
Audio Alert Speaker: all audible alerts and Digital Voice
Messages are emitted from this location.
9.
Power Jack: using the straight or coiled cord,
bel 980
or bel 950 operate in any vehicle with a 13.8 volt dc
negative ground system (10.5 volt to 16 volt range).
Note: Model 980 is the same as Model 950 except for the
addition of these features: Signal Strength Digit, City All Mode,
X/K/Ka Band On/Off, 9 audio level settings, Travel Case,
4' straight power cord and 2 year warranty.
d e s c r ip t io n o f fe at u re s
Power-Up Test Sequence/Start-up Mode
Each time your detector is turned on, bel 980 or bel 950
will perform a power-up test sequence based upon the Start-Up
mode selected. There are three Start-Up modes of operation
plus a Tutorial mode. Release the pwr button at your chosen
selection.
Note—Pressing pwr at any time during start-up will bypass
the sequence.
NORMAL
(Factory pre-set Mode)
Presents Audio and Text Messages for Laser, Ka, K, X and
Safety Warning System® (sws
™ ). After this sequence, the
status of Selectable Features is displayed:
“CITY X” or “CITYALL ”; “X/K/KA o n /o f f ”; “Am u t e
“Am u t e o f f ”; “R/LVo i c e , “R/L to n e ” ; “SWS o n ”,
“SWS o f f ”; “SWSv o i c e ”, “SWSt o n e ”; “SCROLfa s t ”,
“SCROLs l o w ” . Unit is now ready for operation.
Note: City X,City All and X/K/Ka On/off do not appear on model 950
MODS
(Modifications Mode)
Presents Audio and Text Messages for Laser,Ka,K,X and Safety
Warning System® (sws
™ ),followed by the presentation of Selectable
Features as chosen by the user.Unit is ready for operation. 
o n ,