chiliGREEN IPMTB-GS - Manual (Page 26)

26 IPMTB-GS Motherboard Reference Guide
BIOS SETUP UTILITY
Advanced
F1
Install or Change the
password.
Select Screen
Select Item
Change
General Help
Save and Exit F10
Exit ESC
Enter
Security Settings
Main
Supervisor Password
Change Supervisor Password
:Not Installed
:Not Installed
User Password
Change User Password
v02.61 (C) Copyright 1985-2008, American Megatrends, Inc.
Boot Exit Power Security
Security
The security items allow you to view or change system security settings.
Enter New Password
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor
Password item on top of the screen shows the default Not Installed. After you set
a password, this item shows Installed.
To set a Supervisor Password:
1. Select the Change Supervisor
Password item and press .
2. From the password box, type a
password composed of at least six
letters and/or numbers, then press
.
3. Confirm the password when
prompted.
The message “Password Installed” appears after you successfully set your
password. To change the supervisor password, follow the same steps as in setting
a user password. To clear the supervisor password, select the Change Supervisor
Password then press . The message “Password Uninstalled” appears.
NOTE: If you forget your BIOS password, you can clear it by erasing the CMOS
Real Time Clock (RTC) RAM. See your hardware documentation for information
on how to erase the RTC RAM.
8 BIOS Setup reference