7 connectors, Serial ata connectors, Usb connectors – chiliGREEN IPMTB-GS User Manual
Page 19
![background image](/manuals/556302/19/background.png)
IPMTB-GS Motherboard Reference Guide
19
Serial ATA connectors
These connectors are for the Serial ATA signal cables for Serial ATA devices.
SATA3
SATA4
Ground
Ground
Ground
SATA_RX(+)
SATA_RX(-)
SATA_TX(-)
SATA_TX(+)
Ground
Ground
Ground
SATA_RX(+)
SATA_RX(-)
SATA_TX(-)
SATA_TX(+)
7 Connectors
USB connectors
These connectors are for USB 2.0 ports. Connect a USB module cable to any
of these connectors, then install the module to a slot opening at the back of the
system chassis. These USB connectors comply with USB 2.0 specification that
supports up to 480 Mbps connection speed.
WARNING: Never connect a 1394 cable to the USB connectors. Doing so
will damage the motherboard!
F_USB4
F_USB3
F_USB2
USB*(-) USB*(+)
USB*(+)
USB*(-)
Ground
Ground
SBV
SBV
NC
USB*(-) USB*(+)
USB*(+)
USB*(-)
Ground
Ground
SBV
SBV
NC
USB*(-) USB*(+)
USB*(+)
USB*(-)
Ground
Ground
SBV
SBV
NC
SATA1
SATA2