chiliGREEN CBL21 - Manual (Page 59)

58
Peripheral Configuration
Configures the peripheral devices.
Bluetooth/Wlan/Camera/Card Read/Azalia
Enable or Disable this device, and in the submenu [Azalia ] you also can
select Auto, Enable or Disable.
VT
Virtualization Technology Enable/Disable.
Configure SATA As
Set Harddisk Controller Configure Type.
POST HotKey Delay
Customizable amount of time for the user to press HotKey at POST.
UMA Share Memory Size
Select DVMT5.0 Pre-Allocated(Fixed) Graphics Memory size used by the Internal
Graphics Device.
Power On Display
Select the Video Device that will be activated during POST
USB Legacy
USB devices boot and access in DOS.If disable USB Legacy, USB device can not
boot.
4.11.3 Security Menu
This menu shows the security setting, such as TPM, User and Supervisor Password,
HDD Password and Power on Password.
InsydeH20 Setup Utility
Main Advanced Security Boot Exit
TPM Status XXXXXXXX
TPM Operation [No Operation]
TPM Force Clear [Enabled]
Supervisor Password : Clear
User Password Clear
Details see the