3g module, Usim card insertion, Engl ish – chiliGREEN W251CZQ User Manual
Page 20
17
Engl
ish
3G Module
(Models A & B Only)
If you have included an optional 3G module in your pur-
chase option, follow the instructions below to install the
USIM card (which will be provided by your service pro-
vider), and then run the appropriate application supplied
with your module.
USIM Card Insertion
1.
Turn off the computer, and turn it over and remove the battery
(slide the latches in the direction indicated below and slide
the battery out).
2.
Locate the SIM card cover and loosen screw
and remove
the SIM card cover
.
Figure 9 - Battery & SIM Card Cover Removal
3.
Insert the USIM card as you would into your mobile phone.
4.
Slide the SIMLOCK towards the hinge (in the direction to the
arrow illustrated in
Figure 10
) in order to release the lock and
lift it up.
5.
Insert the USIM card and close the SIMLOCK.
Figure 10 - Unlock the SIMLOCK
6.
Lock the SIMLOCK by pushing it in the direction of the arrow in
until it clicks into the lock position.
Figure 11 - Lock the SIMLOCK
7.
Replace the cover, screw and battery.
1
2
3
1
3
2