chiliGREEN MS1761 - Manual (Page 77)

3-31
G
e
ttin
g
Sta
rted
„ Selecting the LED Flashing Mode in Idle status
Select a desired LED Flashing Mode in Idle status. The selection will take effect while the
system is in Sleep mode.
y Click on [ Idle ], and then select a desired LED flashing mode from Wave, Breathing,
and OFF.
„ Deciding the illuminated color of LEDs
The flashing LEDs which are mounted beneath the keyboard are divided into three sections.
Users are allowed to decide the illuminated color of LEDs for each section.
y First, select a flashing mode for Standard status or Idle status (refer to the previous
step.)
y Click on the LED section A/ B/ C with your mouse,
y Select a desired color from the Color Wheel by clicking on it,
y Each LED section can be turned off individually. To do so, simply click on the LED
Switch A/ B/ C to have the LED section A/ B/ C remained unlit temporary, until this
switch is clicked again.
„ Adjusting the brightness level of LEDs
When Gaming mode and Normal mode is selected, the brightness level of LEDs is
adjustable.
y Select the Gaming mode or Normal mode in Standard status,
y Use the following buttons to adjust the brightness level of the LEDs