Carter-Hoffmann HL10-10-RW - Manual (Page 18)

DRAWER WARMER MAINTENANCE
WARNING:
DO NOT perform
these procedures
while the cabinet is turned on
or heated. Turn off the power
and wait for the cabinet to cool
to room temperature.
ELECTRIC SHOCK HAZARD
Disconnect appliance from
electric power before cleaning.
CAUTION:
HOT SURFACE
Exposed surfaces can be hot
to the touch and may cause
burns. Allow appliance to cool
before cleaning.
ADJUSTMENTS AND LUBRICATION
PRECAUTIONS: Turn control knob to OFF.
Allow
drawers to cool before proceeding.
Remove drawer pans.
FREQUENCY: Minimum—monthly.
Every
2 weeks recommended
TOOLS: Screwdrivers, Phillips (+) and flat blade (-)
Nut drivers, 3/8” and 7/16”
Food-grade lubricant
1. Check slides on cabinet and drawers for cleanliness.
2. Check all rollers on cabinet and drawers for cleanliness and
tightness. Lubricate.
3. Check cabinet drawer stops for operation. Non-spring stops
must rotate freely. Spring-type stops must snap down postitive-
ly. Clean and adjust as required.
4. Check cabinet heating element fasteners for tightness.
5. Check all cabinet drawer catches for tightness and operation.
Lubricate. Be certain roller is “out” before attempting to install
drawer.
6. Check cabinet thermobulbs for condition. Thermobulbs must be
securely mounted in the appropriate holder. Arrange repairs for
damaged thermobulbs.
7. Check drawer faceplate and handle fasteners for tightness.
8. Check drawer catch clip for tightness.
9. For drawers equipped with gaskets, examine condition of gas-
ket. Arrange repairs for torn or damaged gaskets.
10. Reinstall drawers and check for proper operation.
18