Daily cleaning procedures—drawer warmer – Carter-Hoffmann HL8-10-RW User Manual
Page 14

14
DAILY CLEANING PROCEDURES—DRAWER WARMER
PRECAUTIONS: Turn control knob to OFF.
Allow
drawers
to
cool
before
proceeding.
Remove
drawer
pans.
FREQUENCY: Minimum—Daily
TOOLS:
Warm
water
and
mild
detergent
Clean
cloth
or
sponge
1. Remove drawers from warmer:
A. Pull warmer drawer out until fully extended
B. Slide finger along left and right slide rail until you reach the
latches (located at the front end of the cabinet-mounted
rails). Press down on both left and right latch.
C. Pull drawer away from warmer.
CAUTION:
ELECTRIC SHOCK
HAZARD
Disconnect appliance from
electric power before cleaning.
CAUTION:
HOT SURFACE
Exposed surfaces can
be hot to the touch and may
cause burns. Allow appliance
to cool before cleaning.
IMPORTANT:
DO NOT spill or pour
water into controls,
control panel or wiring.
Water damage is not covered
by warranty.
CAUTION:
Beware of sharp edg-
es with sheet metal
during cleaning process.
2. Clean drawers, drawer pans, Humitrol racks and/or insets with
warm water and mild detergent.
Rinse all components thoroughly with clear water.
Dry all components prior to reinstalling them in warmer.
3. Sweep crumbs and other debris from warmer cavity.
4. Clean the outside of the unit by wiping with a clean cloth or
sponge, warm water and mild detergent. Dry with a clean
cloth, then wipe with a polish formulated for stainless steel.
5. It is important to keep the slide rails clear and free of debris.
Periodic cleaning of the slide rails and other adjoining parts is
necessary to assure smooth drawer operation.
6. Check drawer rollers. Be sure they roll freely and that the slide
rails are free from debris.
7. Be sure cabinet-mounted drawer catch roller is “up”, then
reinstall drawers.