Caron 6105 - Manual (Page 12)

Model 6105 Operations Manual Rev I 03/03/2014 Page 12 of 22
Temperature
Change Set Point
Use the up and down arrow push-buttons to obtain the desired temperature set point (red upper display). The
temperature is displayed in ºC.
To turn off the temperature control system, but still display the chamber temperature, press the EZ button.
The words “OFF” will display in the set-point area. To toggle back to controlled temperature, press the EZ
button again.
The chamber drops in temperature slowly. For faster recovery time when lowering the temperature, open the
door. The chamber will only control temperature within the specified range.
Controller Parameters
The Advance and Infinity/Home buttons are for diagnostics purposes. Pressing the Advance button will
display the amount of time (in percent) that the heaters are on. Press the Infinity/Home button to return to the
temperature display.
The unit is capable of reaching temperatures that could result in
burns. Always wear protective clothing when accessing the unit.
Use caution when opening the outer door.
Advance
button
Temperature
set point
Actual
temperature
Up button
Down button
Infinity/Home
button
EZ button