Program example 1 – Carbolite 3508 User Manual
Page 15
Notes
15
MC19-1.20
5.13 Program Example 1
The following sequence of entries creates and runs the program shown graphically below.
1.
Turn the controller SP down to ‘0’ by pressing down
.
2.
Press page
until Prog, Segments Used is displayed. On P10 or P25 models press
up
or down to select a new program number, (a program with only 1 segment).
3.
Press scroll
until Holdback Value is displayed. Default ‘0’ degrees.
4.
Press scroll
until Ramp Units is displayed. Press up or down to set to ‘Min’
5.
Press scroll
until Cycles is displayed. Default ‘1’
6.
Press scroll
until Segment 1 is displayed
7.
Press scroll
until Segment Type is displayed. Press up or down to select
‘Rate’
8.
Press scroll
until Holdback Type is displayed. Default ‘Off’
9.
Press scroll
until Target SP is displayed. Press up or down to set to ‘400’
degrees.
10.
Press scroll
until Ramp Rate is displayed. Press up or down to set to ‘5.0’
degrees per minute.
Repeat steps 6 to 10 for 4 more segments. Set Holdback to the default ‘Off’. Enter the
following parameters and values:
Segment Typ
e Dwell Duration ‘30:00.0’ minutes
Segment Type Step Target SP ‘600’ degrees
Segment Type Dwell Duration ‘30:00.0’ minutes
Segment Type Time Target SP ‘200’ degrees, Duration ‘2:00:0’ hours
Finish the program with an End segment:
11.
Press scroll
until Segment Type is displayed. Press up or down to select
‘End’
12.
Press scroll
until End Type is displayed. Press up or down to select ‘Reset’
13.
Press page
and scroll together to return to the home display.
To run the program either press RUN/HOLD or:
14.
Press page
until Program Status is displayed
15.
Press scroll
until the cursor moves to the program status of ‘Reset’
16.
Press
to select ‘Run’.
Segment 1
Type ‘Rate’
Target 400°
Rate 5.0°/Min
Segment 2
Type ‘Dwell’
Duration
30min
Segment 3
Type ‘Step’
Target 600°
Segment 4
Type ‘Dwell’
Duration
30min
Segment 5
Type ‘Time’
Target 200°
Time 2 hours
Segment 6
Type ‘End’
End type
‘Reset’
400°C
600°C
200°C
5°C/m
30min
30min
2 hours
Time display examples
10:05.3 Min / Sec / 10
th
Sec
24:10:05 Hour / Min / Sec
196:10 Hour / Min