CalDigit VR mini - Manual (Page 14)

14
C. Configuring your RAID
If you wish to create your RAID from the LCD, please
follow the steps below.
1. Turn on the CalDigit VR mini, once it has booted, press the
right button next to the LCD panel. Press the right button
one more time when the LCD displays “Create RAID”, then
confirm the selection by pressing the left button.
2. You will see the CalDigit VR mini cycle through the
following RAID levels; R0>R1>SPAN>JBOD. Select the
desired RAID level by pressing the right button. You will
receive a confirmation message with the RAID level you
selected. Select Yes to continue, Cancel to go back. When
you see"Are you sure?" press the left button to confirm, or
the right button to cancel and return to the previous menu.