CalDigit VR2 - Manual (Page 15)

If you wish to create your RAID from the LCD, please follow the steps below.
Turn on the CalDigit VR2. Press the right button next to the LCD panel. Press the button
one more time when the LCD displays Create RAID. Confirm by pressing the left button.
You will see the CalDigit VR2 cycle through the following RAID levels;
RAID 0>RAID 1>SPAN>JBOD>Clear RAID Info. Select the desired RAID level by pressing
the right button. You will receive a confirmation message with the RAID level you
selected. Select Yes to continue, Cancel to go back. When you see"Are you sure?" press
the left button to confirm, or the right button to cancel and return to the previous menu.
Press the left button when you see "Erase all data". Or press the right button to cancel
and return to the previous menu.
Press the left button when you see "Final Confirm". This will erase all data on the RAID.
Or press the right button to cancel and return to the previous menu.
WARNING: This will erase ALL data on the RAID.
1
2
3
4
Configuring your RAID
15