CalDigit VR2 - Manual (Page 11)

MISC config - internal system set up
Beeper on/off
Turn the audible alarm on or off.
Turbo Mode on/off
Turn Turbo Mode on or off. Turbo Mode is designed to provide the CalDigit VR2
with an extra speed boost.
Japanese language
Toggle the CalDigit VR2 LCD menu between English or Japanese.
Boot option 1/2
Toggle between boot option 1 or 2. Boot option is recommended for most users,
who are using the CalDigit VR2 as a boot drive under OS X. You can use
boot option 2 if you have any issues booting from the VR2.
Access LED on/off
Turn the access LED lights on or off.
Auto rebuild on/off
Turn the auto rebuild function of the VR2 on or off. Auto rebuild is used when the
CalDigit VR2 is used in RAID 1 and a new CalDigit drive module is inserted.
Load default config.
Restore the CalDigit VR2 to the factory settings.
For more information about the LCD, please go to www.caldigit.com/support.asp
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
11