CalDigit VR - Manual (Page 13)

13
C. Configuring your RAID
If you wish to create your RAID from the LCD, please
follow the steps below.
1. Turn on the CalDigit VR. Press the right button next to the
LCD panel. Press the button one more time when the LCD
displays Create RAID. Confirm by pressing the left button.
2. You will see the CalDigit VR cycle through the following
RAID levels; RAID 0>RAID 1>SPAN. Select the desired
RAID level by pressing the right button. You will receive a
confirmation message with the RAID level you selected.
Select Yes to continue, Cancel to go back. When you
see"Are you sure?" press the left button to confirm, or the
right button to cancel and return to the previous menu.