CalDigit AV Drive User Manual
Page 10
Connecting the CalDigit AV Drive (USB3.0 Interface)
Please make sure you have a USB 3.0 interface on the computer.
If you need to install the CalDigit SuperSpeed PCI Express Card, please make sure the
computer is turned off. Unplug the power cord and wait 5 to 10 minutes allowing the
computer’s internal components to cool.
Open up the computer. If you are using a MacPro, please hold the side access panel and lift
the latch on the back of the computer. Remove the access panel. If you are using a PC, please
make sure there is an available PCIe slot and remove any necessary screws.
Power Cord Socket
Power Cord Plug
1
2
3
10