C.B.S. Scientific SG Series - Manual (Page 8)

C.B.S. œ Scientific
8
Adjustable Height Sequencer
2.2 Unpacking- Dual Adjustable Height Sequencer
Please verify that your sequencing unit comes complete with the following components:
• Buffer reservoirs, divided upper • Rotating base with leveling feet
& lower with safety covers/power leads
• Rosette knobs (two)
• Drain plugs installed in upper reservoir • Four white nylon tubing adapters for buffer
• Twelve white spring clamps
drain ports
(Cat.# GPC-0001)
• Guide Rods
• Four knurled black thumb screws
for securing lower reservoir to base
reservoirs
If a kit was ordered verify that you received the following accessories:
• Two combs (sharktooth or rectangular) • Two sets spacers
• Two sets glass plates • One roll gel sealing tape, Cat. # GT-72-10
• Two wedge plate separators • Two temperature strip, Cat.# EGT-100 (not shown)
Cat. # WPS-100 (not shown)