C.B.S. Scientific EPS – 200 X - Manual (Page 7)

EPS-200 X
5
C. Installation of EPS-200 X Power Supply
C-1. Package List
Item Quantity
EPS-200 X power supply
1
Power cable
1
Instruction package
1
C-2. Setup and Operation of the EPS-200 X Power Supply
C-2-1. Unpacking
Unwrap all packages carefully and compare contents with the packing list, ensure the arrival of
all the items. If any part is missing, contact your local C.B.S. Scientific representative. Inspect all
the components for damage that may have occurred while the unit was in transit. If any part
appears damaged, contact the carrier immediately. Be sure to keep all packing material for
damage claims or to use should it become necessary to return the unit.
C-2-2. Setup and Operation
Caution: Use only one hand when making or breaking a connection to avoid making a
complete circuit across your chest. Also while connecting or disconnecting the leads, do not
allow any part of your body to contact a grounded surface. Ensure your other hand is not
touching anything that grounds you.
Caution: If you are in the middle of a run and wish to connect or disconnect the leads,
always turn the power off (RUN button) and wait for the display to read “OFF”