Bos DEVILLE AM 2014 User manual - Manual (Page 8)

What initial settings for the fork?
The "Deville Chart list" is available on the download section of the bosmtb.com website. The « Deville Chart list » summarizes the
recommended settings (clicks and air pressure) depending on the body weight. Refer also to chapter 2 of this manual for details.
My fork is leaking when I connect the high pressure pump, what can I do?
Check with a Schrader valve tool if it is screwed correctly.
At rest position, the fork travel is slightly engaged (small SAG), is this normal?
The BOS air spring system is designed to offer the lowest threshold of release. Some forks may come with a slightly negative travel.
Where can I get the original stickers or valve cap?
Those items are available on the online store at bosmtb.com. Or contact our sales department for informations
[email protected].
The fork comes with a slightly play on stanchions area, what should I do?
The unique alignment of the bushings of the BOS forks creates an induced a slight frontal play. If the play is abnormally high, please
contact BOS approved center for expertise.
The fork retracts when I deflate the air chamber, what's happening?
Deflating the fork means removing the air from the positive chamber only. The remaining air on the negative air chamber creates
an opposite force to the main spring and retracts the fork. To avoid this, deflate step by step (30/40 psi) and alternate with a very
slow oscillations (5 or 6) on the first 15 mm of stroke to recover the full travel.
The fork feeling in the M position doesn’t feel right for me?
If the initial position of the M setting does not give you the feeling that you are looking for, you can modify the position of the
click (refer to paragraph 2.2 in hydraulic adjustments).
4 . FAQ