Iv. method of installation, Operation button, Basic operation – BLITZ R-VIT Type 2 User Manual

Page 7: Online manual not for resale purposes

Page 7 of 29

WARNING-All images and text in this manual is the property of Blitz Co., Ltd. (Japan).
No part of this manual may be reproduced, stored in retrieval systems, or transmitted in any way
without prior written permission of Blitz Co., Ltd. (Japan).

IV. Method of installation

1. Connect the suplied R-VIT’s [Main Harness Black 30cm] with the [Display Harness (Black 5 feet)].

2. Connect the [Self-diagnosis connector (female)] to the vehicle’s self-diagnosis connector.

3. Find a suitable spot to install the Ｒ－ＶＩＴ monitor.

4. Use zip ties to tie up extra wiring.

① DO NOT install the Ｒ－ＶＩT’s display where it might interfere with your driving or any type of

movement. (Ex: Steering wheel, pedals, etc)

② Make sure the R-VIT is within the driver’s line of sight, so that the driver will not need to move from

the driving position

③ Make sure the R-VIT’s display is securely mounted.

④ Make sure all the connectors are secured.

Operating instructions

Basic operation.

Operation button

Basic operation

ENTER Switch

To confirm each item

UP and DOWN Switch

Use for selection, record of each item/replay

LEFT Switch

It returns the MAIN MENU and returns to previous screen

RIGHT Switch

Use for PEAK clearing

Down Switch

Right Switch

Left Switch

Enter Switch

Up Switch

Online Manual Not For Resale Purposes