Online manual not for resale purposes – BLITZ R-VIT Type 2 User Manual

Page 18

Page 18 of 29

WARNING-All images and text in this manual is the property of Blitz Co., Ltd. (Japan).
No part of this manual may be reproduced, stored in retrieval systems, or transmitted in any way
without prior written permission of Blitz Co., Ltd. (Japan).

Diagnosis Mode.

Number of Fault

Diagnosis.

(In this case, there

aren’t any faults)

Content of

Fault

Diagnosis

DIAGNOSIS DISPLAY

1. It displays the number of fault diagnosis from the vehicle’s ECU

2. It is located on the 19

role at the MAIN MENU. [⑲The number of fault diagnosis] and [⑳ Fault

diagnosis contents].

3. Configuration Method

z To display the DIAGNOSIS MODE, select and enter [DIAGNOSIS] by scrolling up or down

at the MAIN MENU.

z After confirming, the number and content of fault diagnosis will appear.

z Press the left button, and it will go back to the Main Menu.

[Warning]

z It displays the number and content of fault diagnosis.

z If there are many faulty codes, it will select and display the most common faulty

code.

z Depending on a vehicle’s computer and place of faulty diagnosis, it will not be able to

display all the numbers of fault diagnosis.

z It will not display all the content of faulty diagnosis.

z If a Sub-Computer is installed, a fault diagnose may appear.

Online Manual Not For Resale Purposes