Adjusting draw length – rotating module system, Cam adjustments – Bear Archery Compound Bow 2012 User Manual
Page 22

22
CAM ADJUSTMENTS
Adjusting Draw Length – Rotating Module
System
Bow models:
• Legion
• Encounter
• Siren
Module #
Setting
Legion
DL
Encounter
DL
Siren DL
5
26"
27"
22"
5.5
26.5"
27.5"
22.5"
6
27"
28"
23"
6.5
27.5"
28.5"
23.5"
7
28"
29"
24"
7.5
28.5"
29.5"
24.5"
8
29"
30"
25"
8.5
29.5"
30.5"
25.5"
9
30"
31"
26"
9.5
30.5"
31.5"
26.5"
10
31"
32"
27"
The rotating module cam system allows the bow
to be adjusted to all of its draw length positions
without the use of separate individual modules
and does not require a bow press for draw length
adjustments at 1/2” increments. Draw length
changes are made by first removing the socket
head cap screws that secure the rotating module
unit. Next, rotate the module until the desired
draw length tick mark is lined up with the
module tick mark, and reinstall the screws in the
corresponding holes. The cam itself is marked
with draw length increments where #10 is the
longest setting and #5 is the shortest. Such draw
length adjustments will not affect peak draw
weight. When the rotating module unit is
repositioned to adjust draw length, the draw stop
must also be moved to the corresponding setting
marked on the cam.