Barranca Diamond 6-inch TS6 Trim Saw User Manual
Page 19
1
4. Reattach the saw table with the four mounting screws and belt guard.
5. Be sure the cork tank gasket is positioned correctly between the saw table and reservoir and that
the proper amount of lubricant is in the reservoir before attaching the saw table.
NOTICE Do not over tighten the jam nut! Blade flanges must always be installed with their con-
cave or recessed side facing the blade (see Figure 22).
Figure 22: Convex (recessed) Side of the Blade Flange
6-inch Trim Saw Accessories
Item
Description
Part#
Diamond Rim Blade (154.4 mm) x .020" (.508 mm) x 5.8" (15.8 mm) 153692
Dressing Sticks
6" x 1" x 1"
999997
TS6
INSTALLATION & REMOVAL