Bakers Pride 616 Manual - Manual (Page 21)

21
TROUBLESHOOTING
PROBLEM
POSSIBLE
CAUSE
REMEDY
Oven temperature Too
High/Too Low Thermostat setting Calibrate thermostat
Blocked supply line
No electric No electric to oven
Unplugged
Switch shut-off
No 24V to ignition module. Change transformer
Ignitor failure Ignitor doesn’t light. Check voltage, change ignitor
Soot in ignitor. Clean.
Ignitor lights but doesn’t pass enough current to module. Change
ignitor
Module failure Module receives voltage but doesn't light ignitor. Change module.
Module lights ignitor but doesn’t sense its current. Change module.
Module receives current from ignitor but fails to open gas valve.
Change module.
Booster burner won’t stay
lit No flame sense Sense rod missing ground connection. Clean and tighten.
Soot on sense rod. Clean.
Sense rod fails. Change sense rod.
Booster burner won’t light No gas Gas valve for booster burner shut-off
Ventilation Incorrect air flow can affect oven performance. Have checked by a