Bakers Pride 616 Manual - Manual (Page 17)

17
IL FORNO BOOSTER BURNER
The Il Forno booster burner is located in the center rear of the oven cavity visible through the front
opening as an added visual effect. It also provides 20 KBTU additional heat to the oven.
Controls for this feature are in the left side compartment behind the typical gas control stack. The
booster burner is plumbed and controlled separately from the main burner. There is an ON-OFF switch
just inside the control compartment door. There is an ON-OFF switch on the gas valve.
When turned on the ignition module energizes the hot surface ignitor. When the hot surface ignitor
reaches current a signal opens the gas valve for the burner. The flame sensor completes the circuit
when it signals the ignition module it is sensing flame. This burner has its own inspirator and it typi-
cally adjusted to provide a YELLOW flame to simulate wood burning at the back of the cavity.
ON-OFF
TRANSFORMER
FUSE
TERMINAL
BLOCK
IGNITION
MODULE
NEWER
MOUNTING
OLDER
MOUNTING