Autoquip CMD DOCK LIFT - Manual (Page 14)

14
The CMD is easy to install and operate. It is completely self-contained and ready to go
to work as soon as the unit is received. The control is centrally located on the platform
to allow operation from any side. All electrical components and wiring are in
accordance with the National Electrical Code. Loads can be quickly rolled over the
hinged throw-over bridge onto the platform. A removable “T” handle is provided
enabling one person to move the empty CMD. No pit is required and the unit can be
used to service several locations. The portability wheels are large enough to facilitate
ease of movement and to minimize damage to surfaces. The CMD may be used inside
or outside. It requires no lagging and is completely weatherproof.
1. Wire the heavy-duty power cord into a suitable single-phase outlet.
2. Check to insure there is proper pump rotation.
INSTALLATION INSTRUCTIONS