Autoquip GATES VERTICAL ACTING - Manual (Page 4)

4
INSPECTION & IDENTIFICATION
The following items are typically shipped loose within each manually operated Vertical
Gate order:
A.
(2) Gate Posts with Cables, Pulleys and Interlock Mounting Plates
B. (1) Gate Header Angle with mounting holes
C. (1) or (2) Expanded Metal Gate Panels (depending on style)
D. Interlock Kits
E. Misc. Gate Mounting Hardware, Manual, and Signs/Labels
F. Varies – Expanded Metal Enclosure Panels per General Arrangement Drawing
G. Varies – Enclosure Panel Mounting Teck-Screws, Top Caps, Corner Angles
Powered Gate orders include additional pieces, including:
H. Drive, Bearings, Shaft with Sprockets
I. Operator
Controls
J. Lifting Chains
K. Upper and Lower Travel Limit Switch Kits
L. Miscellaneous Mounting Hardware
NOTE: The “Bill of Lading” will state the number of pieces shipped. TWO ITEMS
MAY BE BANDED TOGETHER AND COUNT AS ONE PIECE.
Upon receipt of the shipment, check for exposed damage or shortages and make note
of it on the trucking company Bill of Lading or the Shipping Papers. Reports of
concealed damage to items contained in crates must be reported within 48 hours. DO
NOT destroy the crating while opening it to inspect the contents. If damage is
suspected or found, report it directly to the carrier. DO NOT contact Autoquip
Corporation!! All shipments are FOB from the Autoquip plant. Any claims for damage
must be filed with the carrier. Any parts shipped from Autoquip that are intended
to replace damaged or lost items will be invoiced to the ordering party.
Assuming no damage has occurred to the crate, check the components against the
packing list. This will provide assurance that every item shipped has been received.
Everything needed for the installation should be available. If not, report any shortages to
Autoquip Corporation within 10 days. (Autoquip is not responsible for parts lost, stolen
or damaged during transportation, storage, installation, or during any other
circumstances or conditions that may be beyond corporate control.)
Before beginning the installation process, look at the skid that the gates and enclosures
arrived on. Check for any damage and compare the packing list to the gates and
enclosures to ensure that everything is on hand. If there are any missing pieces,
contact Autoquip Product Support Team at (405) 282-5200.