Artograph LED 200 Owners Manual - Manual (Page 11)

The built-in grid pattern is a tool you can use alone, or projected over your pictures.
To turn on the grid pattern:
Press MENU on the remote.
Arrow to SCREEN and press OK.
In the SCREEN menu, arrow down to GRID PATTERN.
Press OK.
A popup window opens. Use the right/ left arrows to move through the grid choices.
Choose your grid pattern and press
OK. Arrow down to COLOR. Choose the grid color
that will be most visible over your background, BLACK, GRAY, or WHITE, and press
OK. Arrow down to CLOSE and press OK to hide the toolbar and the selected grid
pattern will now appear over your projected image.
The grid pattern may also be used alone, without any image input (disconnected RGB
cable). Just turn on the projector. Press MENU, then SCREEN, and OK. Arrow to the
grid pattern and select the GRAY or WHITE grid pattern you want to use (black grids
only work over other sources). Select OK and close the menus. The grid pattern will be
projected onto any surface.
Please note: Remember to turn grids off when finished.
There are Six Choices of Grid Patterns
Artograph Digital Art Projector LED200 Operation Guide 11
Grid Patterns
RGB Input Features