Anchor CENTURY MAXI-GRIP USE AND CARE INSTRUCTIONS - Manual (Page 2)

After each and every Tent washing, follow these instructions:
• Completely rinse with plain water and wipe with sponge to remove any detergent residue. This step is critical to the
effective functionality of Maxi-Grip.
• Allow to thoroughly dry.
• Apply 303 Aerospace Protectant as noted on previous page under “Care of Maxi-Grip.”
• Too many electrical cables inside the lace fl aps may put tension on Maxi-grip. There should be NO tension on Maxi-Grip.
• Contaminants of any sort may inhibit the functionality of the Maxi-Grip. Maxi-Grip must be clean and protected to work
properly. Check condition of Maxi-Grip periodically. See Care of “Maxi-Grip”
• Tent Installation may have a bearing on how Maxi-Grip functions. Tent must be properly installed and tensioned. Read
tent installations thoroughly
• Failure or separation of the Maxi-Grip may be due to improper closing during installation. The Maxi-Grip must be properly
sealed in order for it to perform. If separation occurs, repeat Step 2 of the Instructions.
Care of Maxi-Grip after Washing Tent
Problem Checklist
1100 Burch Drive
Evansville, IN 47733
812.867.2421