beautypg.com

Step 2: vinyl wall installation – Anchor EVENT SERIES - PROFILE SIZE: 220MM X 100MM, INSTRUCTION SUPPLEMENT - AMBASSADOOR WITH VINYL WALLS INSTALLATION User Manual

Page 3

background image

Figure 4

Step 2: Vinyl Wall Installation

1. Slide side kedar strips into uprights.

Side Kedar Strip

Kedar for attachment to

Ambassadoor

ELEVATION

Outside View

Kedared, velcroed vinyl strip
attached to inside of wall.

Side Kedar Strip

Plastic ball hooks for
attachment into eave
purlin inside channel.

2. Insert plastic ball hooks into inside channel of eave purlin. Slide vinyl evenly across mid. Note: Door adapter assembly

clamp must be disengaged temporarily so that ball hooks may be slid evenly across the mid bay.

3. Slide kedar for attachment to Ambassadoor down into channels as noted in Figures 3 and 4.

4. Remove kedared velcroed vinyl strip from inside of vinyl wall and slide into top channel of Ambassadoor as shown in

Figure 3.

5. Fasten kedared velcroed vinyl strip to inside of vinyl wall.

6. Lace side kedar strips to vinyl piece attached to eave and ambassadoor.

Kedar for attachment to

Ambassadoor