Anchor CLEAR VINYL DISCLAIMER AND INSTRUCTIONS FOR USE. User Manual
Page 2
1. After installing the clear vinyl tops, tension the tops utilizing tensioning straps or threaded tension-
ers as required by the manufacturer’s written instructions.
2. After tensioning all of the tops is completed, revisit each tensioning device and retighten as need-
ed. Weather or environmental condition may dictate the amount of retensioning required. Simul-
taneously tensioning the clear vinyl top at each end will result in a more uniformed tightness.
3. On the following day, retension each tensioning device as needed due to the clear vinyl tops relax-
ing overnight. Field-testing has determined that it is critical to retension the clear vinyl tops within
24-hours of initial installation.
4. If the clear vinyl tops remain in place for more than one week, inspect and retension the tops
weekly or as weather or environmental conditions dictate. Hot, windy or rainy conditions may
require more frequent inspections and re-tensioning.
IMPORTANT: Any recommendations made by Anchor Industries, Inc. concerning the uses or appli-
cations of the clear vinyl fi lm are believed reliable and consistent with industry standards, but Anchor
Industries, Inc. makes no warranty of results to be obtained. The Buyer/User assumes all responsibil-
ity for loss or damage resulting from the handling and use of clear vinyl goods.
INSTRUCTIONS FOR PROPER TENSIONING AND
MAINTENANCE OF FABRIC TOPS MADE WITH
CLEAR VINYL FILM.
EC4533
CV 0512