Allen&Heath XB-10 - Manual (Page 12)

Allen & Heath 12 XB-10 User Guide
SPECIFICATIONS
Frequency Response
Mic in to PGM L/R Out, 30dB gain +0.5/-1dB 10Hz to 30kHz
Line in to PGM L/R out 0dB gain +0.5/-1dB 10Hz to 20kHz
Stereo in to PGM L/R out +0.5/-1dB 10Hz to 30kHz
Headroom
Analogue Headroom from nominal (0Vu) Outputs 21dB
USB in & out headroom from nominal (0Vu) 14dB
Analogue Headroom from nominal (0Vu) Mix point 24dB
Crosstalk & Attenuation (dB 22-22kHz)
Mono fader attenuation (dB relative to +10dBu) 1kHz/10kHz -88/-88
Mono ON switch attenuation (dB relative to +10dBu) 1kHz/10kHz -98/-98
TELCO fader attenuation (dB relative to +10dBu) 1kHz/10kHz -90/-90
TELCO ON switch attenuation (dB relative to +10dBu) 1kHz/10kHz -98/-98
Stereo fader attenuation (dB relative to +10dBu) 1kHz/10kHz -86/-86
Stereo ON switch attenuation (dB relative to +10dBu) 1kHz/10kHz -99/-96
PGM fader attenuation (dB relative to +10dBu) 1kHz/10kHz -87/-87
TELCO clean-feed isolation from I/P (dB relative to +10dBu) 1kHz/10kHz -94/-77
Stereo separation, L in to PGM R out. dBr 1kHz/10kHz -75/-74