AirLive WN-250USB - Manual (Page 36)

2. Software Installation
31 WN-250USB User’s Manual
2.8.2 AP Advanced
Beacon Interval: Specify the duration between beacon packets (milliseconds). The
range for the beacon period is 20-1000 milliseconds, with a typical value of 100.
DTIM Period: This is the sending interval of the AP’s traffic broadcast. The default
value is 3 beacons.
Preamble: This is the length (“Short” or “Long”) of the CRC block for communication
among wireless stations. High network traffic areas should use “Short.”
Set Defaults: Click to return to default settings.
Apply: Click to confirm the settings.