AirLive WN-250USB User Manual
Page 16
2. Software Installation
11
WN-250USB User’s Manual
Open Config Utility: Select to open the configuration utility.
About: Select to display utility information.
Hide: Select to hide the utility in the system tray.
Quit: Select to quit the utility in the system tray.
The Configuration Utility opens to the General screen, with another five tabs near
the top of the screen you can select for specific configuration options. Whichever of
the tabs you select, several additional options are always displayed at the top, left
and bottom of the screen, as shown on the General screen in the first of the detailed
sections that follow.
Refresh: This updates the adapter list in the left-side window
Mode: This allows you to select one of two modes: Station or Access Point.
• With Station, the adapter works as a wireless adapter
• With Access Point, the adapter works as a wireless AP (Chapter 2.8, SoftAP)
About: This lets you check the version of the utility.
Show Tray Icon: Select to show the utility icon in the system tray
Radio Off: Select to turn off or turn on the radio of the adapter. If the radio is turned
off, the adapter will not work.
Disable Adapter: This allows you to disable or enable the adapter