AirLive WN-200HD - Manual (Page 99)

5. Troubleshooting & FAQ
AirLive WN-200HD User’s Manual 94
controlled by adjacent
switch.
Though nominal voltage has
been officially changed to
230V, 240V is within
tolerances and commonly
found.
United States of
America
120V 60 Hz
5.8 3GPP Table
To use the 3GPP function, in addition to previous section, you might need more
information or configuration to make this function work.
Note that to use the 3GPP function, it strongly recommends to install the Networked
Device with a public and fixed IP address without any firewall protection.
RTSP Port:
Port 554 is the default for RTSP service. However, sometimes, some service
providers change this port number for some reasons. If so, user needs to change this
port accordingly.
Dialing procedure:
1. Choose a verified player (PacketVideo or Realplayer currently)
2. Use the following URL to access:
rtsp://host/mpeg4/media.3gp
Where host is the host name or IP address of the camera.
Compatible 3G mobile phone:
Please contact your dealer to get the approved list of compatible 3G phone.