AirLive WN-200HD - Manual (Page 23)

2. Getting Started
AirLive WN-200HD User’s Manual 18
(1) Enable UPnP option of your NAT router
To use UPnP IGD function (NAT traversal), you need to make sure the UPnP
function is enabled in your router. Most new home routers should support this
function. Some of routers are default enable and others are not. Please check
user’s manual of your NAT router for detail.
(2) Enable UPnP NAT traversal option of the Network Camera
Refer to Setting Î Network Î UPnP page for detail NAT traversal setting.
Note that this option is default enabled.
(3) Access your Network Camera by DIPS
Refer to Setting
Î System Î System page for detail DIPS information.
2.4 Configure IP Camera via Web UI
1. Start the web browser on the computer and type the IP address of the
Camera you want to monitor as below:
The Login Window of the Camera is prompted: