AirLive WN-200HD - Manual (Page 44)

4. Monitor the Image Section
39
AirLive WN-200HD User’s Manual
Friendly Name:
Shows the friendly name of this device here.
UPnP NAT Traversal
When enabled, the device will attempt to configure port mapping in a NAT
router on your network, using UPnP™. Note that UPnP™ must be enabled in
the NAT router first.
Port Range:
The port range will open in NAT router.
External IP address:
Show the IP address and port for WAN access through Internet. If NAT
traversal is configured successfully, user can use this IP address and port to
access this device. The external IP address is not shown in case NAT traversal
function is failed.
4.2.7 Bonjour
Bonjour, also known as zero-configuration networking, enables automatic
discovery of computers, devices, and services on IP networks. Bonjour uses
industry standard IP protocols to allow devices to automatically discover each
other without the need to enter IP addresses or configure DNS servers.
Specifically, Bonjour enables automatic IP address assignment without a
DHCP server, name to address translation without a DNS server, and service
discovery without a directory server. Bonjour is an open protocol which Apple
has submitted to the IETF as part of the ongoing standards-creation process.
Bonjour:
To enable or disable the Bonjour service here.
Friendly Name:
Shows the friendly name of this device here.