AirLive WN-200HD User Manual

Page 36

4. Monitor the Image Section

AirLive WN-200HD User’s Manual

Step 2: Key in security key of WEP or WPA. Then click “Submit” button to

activate wireless setting.

In case, user wants to configure wireless settings manually, please follow the

steps as below:

MAC address:

Displays the Ethernet MAC address of the WLAN card. Note that user can not

change it.

Site survey:

Click the “Refresh” button. It will refresh information window which list is the

result of a network scan. Access points with a disabled SSID Broadcast will not

appear unless the camera is associated with it. The following information is

provided:

Interface Select:

“Wired (Ethernet) only” or “Auto – wired if cable connected, otherwise

wireless”:

Choose wired or wireless mode. However, note that wired is priority.