2 wired ethernet connection – AirLive WMU-6000FS User Manual

Page 17

2.2.2 Wired Ethernet Connection

AirLive WMU-6000FS will detect automatically if the DHCP server is existed,

it will get a IP address form DHCP server. If there is no DHCP server, AirLive

WMU-6000FS will assign a random IP to client and you can get some

information as below shown.

Use one Ethernet cable to connect the AP Storage and your computer directly.

Then go to the command mode and key “ipconfig”. If the IP address and

subnet is 0.0.0.0, please type “ipconfig /renew” to retrieve a IP address:

AirLive WMU-6000FS User’s Manual