Specification – AirLive WL-5460AP v2 User Manual
Page 73

AirLive WL-5460AP v2 User Manual
74
6. Specification
Feature
AP, Bridge, Client, Repeater functions
WISP Client Router mode
WISP + Universal Repeater Mode
Detachable Antenna, 2 LAN ports
802.1x, WPA, WPA2 and Web Mgt.
TX power regulation in 4 levels
Watchdog function use PING
Wireless Client Isolation (e8 firmware)
ACK Timeout Adjustment
DHCP Relay function
802.11g Protection
Hardware
2 x 10/100Mbps LAN Port
2MB Flash, 16MB SDRAM
Reversed SMA Antenna Port
Power, LAN, WLAN LED indicators
Antenna
2 dBi detachable Dipole Antenna
Reversed SMA Connector
Frequency Range
USA (FCC) 11 Channels: 2.412GHz~2.462GHz
Europe (ETSI) 13 Channels : 2.412GHz~2.472GHz
Japan (TELEC) 14 Channels :2.412GHz~2.483GHz
Modulation Technique
11g Orthogonal Frequency Division Multiplexing (64QAM,
16QAM, QPSK,
BPSK)
11b Direct Sequence Spread Spectrum (CCK, DQPSK,
DBPSK)
Data Rate: 54, 48, 36, 24, 18,11, 5.5, 2, 1 Mbps
Output Power
EU and FCC version
l
20dBm Max
l
Adjustable in 6 levels
Brazil version
l
26dBm Max
l
Adjustable in 8 levels
WISP Mode
DHCP, PPTP, L2TP, PPPoE ISP Authentication Support
Wireless Client function as WAN
WISP mode is not the same router mode