AirLive WL-5460AP v2 User Manual

Page 7

Traffic Control QoS Function
Traffic Control is a great tool to control the

bandwidth of the WISP subscribers.

Therefore, the WISP operators can offer

different class of connection speeds for

different subscription fees - just like the

ADSL service! The AirLive advance

Traffic Control firmware can control the

bandwidth by Interface or IP/MAC.

Dynamic Signal Survey Function for Antenna Alignment

Having trouble align your antenna correctly to

the other outdoor AP? The AirLive Wireless

Signal Survey function tells you the receiving

signal strength dynamically as your antenna

turns. It automatically refreshes itself in

the process, therefore, making antenna

alignment much simpler than before.

Wireless Site Survey Connection

Wizard

During a new WISP service installation,

the installer will need to find out which

outdoor AP provide the best signal in the

area for connection. The AirLive

wireless site survey function provides

one step setup for this process. First,

the site survey page shows which AP

has the strongest the signal. Then the

installer performs antenna alignment by

using the signal survey function. At last, the installer simply clicks on “connect” button to

establish connection. The site survey is available even in AP mode, so the installer can

check the channels used by surrounding APs to avoid interferences.