AirLive WL-5420CAM - Manual (Page 31)

- Default Level: Select this option to use the default
image settings of the camera.
• Quality: You can setup the image quality from this
pull-down list. The default setting is High.
• Capture Resolution: You can setup the image
resolution as VGA/QVGA/QQVGA when you capture a
still image. The default setting is VGA(640*480).
- Custom Level: Select this option when you want to
customize the image configuration.
• Capture Resolution: You can setup the image
resolution as VGA/QVGA/QQVGA when you capture a
still image. The default setting is VGA(640*480).
• Frame Rate (fps): Select the optimal setting
depending on your network status. The higher setting
can obtain better quality; however, it will use more
resource within your network. The default setting is
15.
30