AirLive WHB-5854A User Manual

Page 22

Text mode
Original mode

AirLive WHB-5854A Wireless Outdoor Bridge

SNMP MIB from external SNMP manager. The default SNMP community
name is “public”. You may change the community name here as your plan.

6) Trap Receiver Trap is the notification of certain events generated by SNMP

agent to send to the network management server. To have the Outdoor
WLAN product send SNMP trap, you need to enter the IP address of the
server where the trap is sent to.
There are two trap messages, "Cold Start" and "Link Up", are supported.
They are sent out when the system is started.

7) Reset to Factory Default Press this button to reset to factory default.

8) Click

and “Reboot” when you finish setting up.

Picture 13 Region/Country Setup