AirLive WH-9000MESH - Manual (Page 48)

Chapter 9: Service Settings Menu
This chapter describes the items about Service Setting. If you don’t know how to enter configuration
screen, chapter 4 describes how to do it. Please keep in mind that you need click Apply to save all
settings. Please keep in mind that you need click Apply to save all settings.
Click the entry on the left hand navigation panel for Service Setting. This directs you to this page.
9.1 DHCP server
This page allows configuration of the DHCP server
function. The DHCP server function, accessible
only from the Local LAN port, is used for initial
configuration of the management function.
The default factory setting for the DHCP server
function is enabled. You can disable the DHCP
server function, if you wish. You can also set the
range of address to be assigned.
WNS server: The WNS (Windows Internet Naming Service) server is used for name resolution. It is
similar in function to DNS. It allows you to search for resources by computer name instead of IP
address
Lease period is for the DHCP server function. The lease times you can select are: 1 hour, 2 hours, 1
day, 2 days, or 1 week.
9.2 SNMP
The SNMP collects and stores
management information for
use in a network management
system. The Wh-9000MESH
integrated SNMP agent
software module translates
the device management
information into a common
form for interpretation by the
SNMP manager, which
usually resides on a network
administrator’s computer.
The SNMP manager function
interacts with the SNMP agent
execute applications to control
AirLive WH-9000-MESH User’s Manual 47