AirLive WH-9000MESH - Manual (Page 40)

7.5 Point-to-Multipoint Bridge Setup Guide
A Point-to-Multipoint configuration allows you to set up three or more 9000MESH in bridging mode and
accomplish bridging between 3 or more locations wirelessly. Figure 7-3 illustrates a Point-to-Multipoint
topology as an example
Figure 7-3 Point-to-Multipoint Bridge scene
BSSID
Bridge 1 Bridge 2
Same as Point-to-Point Bridge Setup procedure, you need to set up with compatible commands in
setup screens. Using Figure 7-3 as a example, Bridge 1 must contain all of the other’s BSSID, while
Bridge 2 and 3 must contain Bridge 1’s BSSID.
Direction Bridge 1 Bridge 2~3
AirLive WH-9000-MESH User’s Manual 39