AirLive WH-9000MESH - Manual (Page 19)

4.1.3 Enter WH- 9000MESH configure screen
The default IP of LAN port is 192.168.15.1. This IP can be change after you enter the configure screen.
Please refer to section 5.5 to understand how to change IP. After you change IP, the IP of LAN will
change as the first one that your new DHCP IP range.
On your computer, pull up a browser window and put the default URL ( https://192.168.15.1 ), or new IP
for the WH-9000MESH Local LAN in the address line.
Note: be sure that you use the https prefix, not http
Note: You can also enter configuration screen from WAN port. The IP address of
the WH-9000MESH from the WAN port or wireless network is "192.168.254.254". Please make sure
your PC is set to the same subnet as the WH-9000MESH.
Note: POE line must connect to the WAN port for power supply.
4.1.4 Enter WH-9000MESH Gateway mode configure screen
I Figure 4-1 Log in IP screen
Key in https://192.168.15.1 ,
4.1.5 Username and Password
Figure 4-2 Login in username and password screen
You will be asked for your user name and
password. The default is “airlive” with the
password “airlive” to give full access for
setup configuration. (This password is
case-sensitive)
After you key in the username and
password, please read the terms and
conditions and check the checkbox “I
agree to the terms and conditions below”
then click the “Sign In” button” to continue
configuration. You can change the username and password as you want after you enter configuration
screen.
!
!
!
AirLive WH-9000-MESH User’s Manual 18