AirLive SNMP-GSH2402 - Manual (Page 67)

63
Broadcast & Multicasat for Ingress Rate Limiting (Policing):
Set up the limit of Ingress bandwidth for the port you choose. Incoming
traffic will be discarded if the rate exceeds the value you set up in Data
Rate field. The format of the packet limits to broadcast and multicast.
Valid range is 0~1000.
All Traffic for Egress Rate Limiting(Shaping):
Set up the limit of Egress bandwidth for the port you choose. Packet
transmission will be delayed if the rate exceeds the value you set up in
Data Rate field. Traffic may be lost if egress buffers run full. The format
of the packet limits to unicast, broadcast and multicast. Valid range is
0~1000.