AirLive SNMP-GSH2402 - Manual (Page 208)

204
mirror
set mirror-mode
Syntax:
set mirror-mode
Description:
To set up the mode of mirror (rx mode or disable).
Argument:
:
rx : enable the mode of mirror(Only mirror the packets that is received)
disable: end the function of mirror
Possible value:
: rx or disable
Example:
SNMP-GSH2402(mirror)# set mirror-mode rx
set monitored-port
Syntax:
set monitored-port
Description:
To set up the port that will be monitored. The packets received by this port will be
copied to the monitoring port.
Argument:
: the port that is chosen for monitored port of the mirror function,
syntax 1,5-7, available from 1 to 24
Possible value:
: 1 to 24
Example:
SNMP-GSH2402(mirror)# set monitored-port 3-5,8,10
set monitoring-port
Syntax:
set monitoring-port <#>
Description:
To set up the monitoring port of the mirror function. User can observe the packets
that the monitored port received via this port.
Argument:
<#>: the monitoring port that is chosen for the mirror function. Only one port is
allowed to configure, available from 1 to 24
Possible value:
<#>:1 to 24
Example:
SNMP-GSH2402(mirror)# set monitoring-port 2