AirLive POE-250HD - Manual (Page 9)

2. Package Contents
AirLive POE-250HD User’s Manual
5
2.1 Connections
1. RJ45 LAN socket: Connect to PC or Hub/Switch.
For connections to 10Base-T Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet
port built N-Way protocol can detect or negotiate the transmission speed of the network
automatically. Please use Category 5 cable to connect the Network Camera to a 100Mbps
Fast Ethernet network switch or hub.
In the LAN socket, there are two LEDs embedded:
LAN LED (green color)
This LED will be flashing while network accessing via Ethernet.
Power & Wireless LED (orange color)
This LED is used to indicate whether DC power is on or not. In addition, this LED will be flashing while the
wireless accessing of the Camera.
2. RS-485: Connect to a local keyboard controller.
„
DI/ DO: Connect to sensor in and alarm out devices