AirLive POE-200CAMv2 User Manual
Page 40
AirLive POE200CAMv2 User’s Manual
39
6.2.10 Setting
Alarm buffer: To activate the Alarm buffer function, select On. The basic setting options are displayed below.
When you do not use the Alarm output function, select Off.
¾
Recording capacity
z
Pre-alarm period: Display the maximum recording capacity of image/audio before the alarm
detection.
z
Post-alarm period: Display the maximum recording capacity of image/audio after the alarm
detection.
¾
Recording time: Set the recording time for the Pre-alarm image/audio and Post alarm image/audio.
z
Pre alarm period: Type it with recording time of the image/audio before the alarm detection.
z
Post alarm period: Type it with recording time of the image/audio after the alarm detection.
Note：The value of Recording capacity differs depending on Image size, Bitrate (for MPEG4)
and Image quality (for MPEG4 and MJPEG) in the camera setting menu.